MLW-2626C-3D: 26-inch Medical Grade 3D Full HD LCD-Monitor
MLW-2626C-3D is a wide screen 26-inch 3D LCD monitor with the high resolution 1920(H) x 1080(V) Full HD LCD panel, wide angle of 178 degrees, Multi-Display function.
LED backlight panel supports high brightness & contrast. Furthermore HD-SDI 3G signal can be input for the true progressive imaging and more suitable to natural images. High performance with 3D HD quality is provided for medical specialists and experts.
By the polaroid film attached on LCD, images seen with right and left eyes are divided at each scanning line. This way is more comfortable to see 3D images by providing a flicker free. It also has cost-performance benefit compared conventional sutter-type 3D.
Applicable to diverse 3D Signals such as side by side, line by line, top&bottom and SIMAL(simultaneous). Two of input signals not only HD-SDI but also DVI-D are availablee. it is also possible to as 2D monitor.
Two types of input images can be displayed simultaneously with Side-by-Side and Picture-in-Picture display mode.
Images can be flipped horizontally and vertically, allowing the correction of image inversion caused by the optics.
LED backlight panel helps saving power. It also supports Higher brightness & Higher contrast than conventional LCD monitors.
The HD-SDI 3G signal can be input for the true progressive imaging and more suitable to natural images.
|SDTV|| Analog : VBS×1ch|
|HD||Digital : Multi-SDI（3G）×2ch（output×2）|
|PC||DVI : DVI-D×2ch（output×1ch）|
RGB Analog : D-SUB×1ch（output×1ch）
Supported Resolution : VGA to WUXGA
|Multi Display||Picture in Picture or Side by Side swap display is available|
|Invert Top and Bottom or Right and Left Function||Standard|
|Resolutions（TVL）||1000TV Line or more(at component input)|
|Safety Approval||UL60601-1/CSA C22.2No601.1|
|EMI Approval||FCC Class A/VCCI Class A|
|Power Requirement||AC100V to AC120V, AC200V to AC240V|
|Power Consumption||100W Max.|
|Operation||Temperature : 5~35℃|
Humidity : 30 to 80% (non condensing)
|Humidity||30 to 90% (non condensing)|
|Dimensions||W640×H418×D82mm (excluding stand and Protrusions)|
|Weight||8kg (excluding stand)|
|Accessories||AC Power Cable / Manual|
|Option||Desktop Stand TS-262|
- In case of emergency, please fill it in the message field.
- This page is encrypted using SSL before transmission.
- For additional information shall refer to "Privacy Statements" on our website.
- Please fill-out all fields for sign up, click "Confirm" button.
- Preffered to fill in English.
- In case, if you are accessing from European Union (EU) countries, please use Ikegami Europe official site, contact form to comply with the EU General Data Protection Regulation (GDPR). [Contact form: http://www.ikegami.de/contact.html]