iHTR-100-series: Video Packetizing Optical Multiplex Fibre Transmission

• 
• 
• 
• 
• 
• 

• 
• 
• 
• 
• 
• 

 
 

Real Time Long Distance Transmission with no Compression for High Bit Rate Video Signals. The device provides 10 km (6.25 miles) transmission distance, multiplexing up to 20 Gbps of multiple format video. (20 Gbps require 2 x SFP Transceiver Module, 2-core fiber cable) It achieves efficient use of optical fiber by using Ikegami’s original multiplex method. Supports various video interfaces by selecting the plug-in unit to be installed in rear of the device. The HD-SDI plug-in interface also supports input and output for 3G and DVB-ASI. (3G, DVB-ASI are optional) With chain or loop connection, the distribution and switching of high bit rate video signals is easily achieved with simple cabling and switch setting. Super low transmission delay provides smooth remote camera control.

• Feature
• Rating/Performance
• Accessory
• Catalog
• Request

• Non compression long distance transmission up to 40 km
• High resolution, Real time, Super low delay rate (< 200 μs)
• Multi -Format Support (HD-SDI, SD-SDI)
• 3G / HD-SDI with Embedded Audio
• Up to 8 multiplexed HD-SDI sources on two fiber cores
• Remote Power Supply with SMPTE Hybrid Camera cable
• Up to 8 HD-SDI inputs or outputs selectable per unit
• Ethernet / Serial (Bi-directional operation)
• Loop Operation up to 8 devices for 8 x10 km Ring Video Network

Optical transmission rate	0.3125G bps Bi-directional - Due to 64b/66b encoding for 10.3125G bps
Optical transceiver	SFP+ unit Max. 2 sets
Multiplex technology	Optical packet multiplex
Coding technology	64b/66b
Fiber cable/Fiber Connector	Single-mode optical fiber/LC type
Max. transmission distance	40km
Optical loss budget	Approx. 5dB (1310nm wave length, with recommended Opt. transceiver)
Video transmission channels	Max. 12ch uncompressed HD-SDI (Optical fiber 2 cores)
Topology	Point to Point, Single direction or Bidirectional/Cascade undirectional connection (max. 8 stations in the network), Loop connection (Max. 8 stations in the network)
Expansion slot	2 slots (Hot-swap not supported)
LAN port	100 BASE-TX (2 point bridged), 100 BASE duplex
System set-up	by PC (tablet) with dedicated application software
Transmission setting	Broadcast distribution
Video transmission delay	Less than 200 micro-sec.(8x HD-SDI in loop connection)
Rate power input	DC12V +/- 10% (Battery operation not supported)
Power consumption	Approx. 30W (with 2x input cards)
Operation temperature	0-40 degree C
External dimensions	181 mm (W) x 44 mm (H) x 255 mm (D) excl. protrusions
Weight Approx.	1.8 kg (configured with 2x IF cards)
Accessories	Black panels (for expansion slot), Optical ports protector

iHTR-B112
20km SFP module

iHTR-B113
40km SFP module

iHTR-B151
4IN IF board

iHTR-B152
4OUT IF board

iHTR-B153
2IN/2OUT IF board

iHTR-B131
Protect Suit

 

 

iHTR-Series Video Packetizing Optical Multiplex Fibre Transmission (Catalog PDF:1.3MB)

---

• In case of emergency, please fill it in the message field.
• This page is encrypted using SSL before transmission.
• Ikegami shall properly handle personal information in accordance with the privacy policy posted on our website.
• For additional information shall refer to "Privacy Statements" on our website.
• Please fill-out all fields for sign up, click "Confirm" button.
• Preffered to fill in English.
• In case, if you are accessing from European Union (EU) countries, please use Ikegami Europe official site, contact form to comply with the EU General Data Protection Regulation (GDPR). [Contact form: http://www.ikegami.de/contact.html]

Ikegami Electronics Asia Pacific Pte. Ltd.