CCU-890: Camera Control Unit

The CCU-890 can transmit the high quality HDTV video signals and audio signals of HDTV studio cameras up to a maximum of 3000m by an optical fiber cable.

Enables transmission of high quality HDTV video signals up to a maximum of 3000m* by an optical fiber cable. (BS-89 : a maximum of 1000m*) Employs the Frame Synchronizer on RET line. *Not available at VBS RET. Available up to 2 RET lines at FS ON. Available embedded audio signal as standard. Using a down converter and an up converter in the CCU, both HDTV and SDTV video are provided simultaneously. (option) The modules for the CCU-890 and the BS-89 are mostly the same. Equipped 4 HD-SDI outputs. With optional triax modules, the triax operations for the CCU-890 can be done. (development plan) Employs ARC NET interface in addition to conventional serial command control. *In the case of the portable cameras

Ratings
Scanning System	59.94Hz 1080 lines 59.94Hz 2:1 interlaced 480 lines 59.94Hz 2:1 interlaced 720 lines 59.94Hz 1:1 non-interlaced (option) *59.94Hz/50Hz Switchable : Factory Option 50Hz 1080 lines 50Hz 2:1 interlaced 580 lines 50Hz 2:1 interlaced 720 lines 50Hz 1:1 non-interlaced (option) *59.94Hz/50Hz Switchable : Factory Option
Input signal
HDTV system	(SMPTE274M and SMPTE292M)
Phase reference signal	PS (1Vp-p) Sync (0.6Vp-p ±6dB) 75Ω bridged, 1ch
Return video signal	HD SDI Signal 75Ω 4ch
SDTV system
Return video signal	D1 (standard), VBS(option) 75Ω 2ch/4ch *In case that VBS (option) is applied, D1 or VBS is selectable.
External genlock signal	VBS 1.0Vp-p 75 Ω bridged, 1ch
Q-TV signal	VBS 1.0Vp-p 75 Ω Single End, 2ch
Intercom / Tally
Intercom (ENG/PROD)	4-wire or Clearcom or RTS
Clearcom	-15dBs 200 Ω 2ch
Tally. contact / voltage	0dBs R, G
Program sound	0dBs 600 Ω 2ch
Output signals
HDTV system
Analog video signal (SMPTE274M)(CCU-890 only)	Y,Pb,Pr 75 Ω each 1ch (HDTV/SDTV selectable) (R,G,B signal output is selectable by Menu)
HD SDI signal (SMPTE292M)	75 Ω 4ch
WFM signal	HD-SDI 75 Ω CCU-890:2ch BS-89:1ch
PM signal	HD-SDI 75 Ω CCU-890:2ch BS-89:1ch
SDTV system
Composite video signal	VBS 1.0Vp-p 75 Ω 2ch
Component video signal	R,G,B 0.7Vp-p 75 Ω each 1ch (CCU-890 only) (HDTV/SDTV selectable) (Y, Pb, Pr signal output is selectable by Menu) Component serial signal (D1). (SMPTE259M) 270Mbit/s 0.8Vp-p 75 Ω 2ch
WFM signal	R,G,B,Y,ENC select 1.0Vp-p75 Ω or SDI 75 Ω CCU-890:2ch BS-89:1ch
PM signal	R,G,B,Y,ENC select 1.0Vp-p75 Ω or SDI 75 Ω CCU-890:2ch BS-89:1ch
Audio Signal	Mic:0dBm Low 2ch Digital audio: AES 3ID 1Vp-p 75 Ω 1ch (CCU-890 only) (In conformity with AES/EBU)
Intercom/Tally	Intercom (ENG/PROD) 4-wire or Clearcom or RTS 4-wire 0dBm 600 Ω 2ch Clearcom -15dBs 200 Ω 2ch RTS 0dBm 200 Ω 2ch
Ambient temperature	0ºC ~ +45ºC
Relative humidity	30%~90% (Non-condensing)
Weight	CCU-890:approx. 28kg BS-89:approx. 9kg
Dimensions	CCU-890:W482.6 x H132.6 x D477.6mm BS-89:W219 x H125 x D457mm
Performance
Video frequency response (Base Station output)	Y output Below 60Hz Falling 60 within ±1.0dB Over 30MHz Falling SDTV output signal (Ych 100kHz, output signal from external camera control equipment) Below 60Hz Below 60Hz Falling 60Hz~4.5MHz within +-0.5dB 4.5MHz~5.0MHz within +-1.0dB Over 5MHz Falling
Audio Frequency response (Base Station output)	Y output Below 100Hz Falling 100Hz~10kHz within +-1.0dB Over 10kHz Falling
Power consumption	CCU-890:approx. 500VA (including 9-inch LCD color viewfinder) BS-89: approx. 80VA
Support Products	・broadcast/HDK-77EXa ・broadcast/HDK-790EXIII / HDK-79EXIII[α version]