CCU-970: 3G Camera Control Unit

CCU-970 is 3G ready Fiber transmission Camera Control Unit. 3G transmission systems can be configured in combination with 3G ready cameras.

  • 3G Wideband transmission between camera head and CCU as well as 1.5G output.
  • Build-in SDTV Down Converter as standard for SDTV/SDTV simulcast output.
  • 4 channels RET video input as standard. Input signal is either 3G-SDI or HD-SDI.
  • QTV (VBS) x1 as standard (2nd CH as option) and HD-SDI as option. *Note 1
  • HD-SDI TRUNK for the transmission of different video signal from camera between camera and CCU as option.*Note 2
  • Frame Synchronizer in RET video.*Note 3
  • SDI signal with embedded Audio
  • Also usable with existing HDK-79EX series / HDK-79GX cameras in 1.5G mode.
    *Note 4.


*Note 1: The return input signal can only be HDTV when this option is installed.
*Note 2: Only in 1.5G mode.
*Note 3:The RET input signal is fixed to 2CH when the frame synchronizer is in use. Also VBS return signal can not be synchronized.
*Note 4 : New functions provided by 3G transmission of HDK-97A are not available.

This unit is mainly used with :
HDK-97A with FA-97
HDK-79GX (in 1.5G mode) with FA-97

Input Signals
GENLOCK signal
(HDTV/SDTV supported) 		HDTV : PS 1Vp-p 75Ω bridged connection
or Tri-sync signal 0.6Vp-p ± 6dB 75Ω bridged connection
SDTV : VBS 1Vp-p 75Ω bridged connection or BBS 75Ω bridged connection or BBS+10FIELD ID 75Ω bridged connection

Return signal 3G-SDI/HD-SDI : 4 channels* 75Ω single end input (* 2 channels when the frame synchronizer function is enabled.)
4 channels* 75Ω single end input
(* 2 channels when the frame synchronizer function is enabled.)
4 channels (2 channels option) 75Ω single end input
Q-TV signal VBS : 2 channels 1Vp-p 75Ω single end input
HD-SDI(option) : 1 channel 75Ω single end input
Intercom signal (ENG/PROD) Select from 4-wire/Clearcom/RTS
4-wire : 2 channels 0dBm 600Ω
Clearcom : 2 channels -15dBs 200Ω
RTS : 2 channels 0dBm 200Ω
PGM (Program sound) 0dBs standard
2 channels 600Ω/10kΩ
AUDIO TRUNK 0dBs standard
1 channel 600Ω/10kΩ
Tally signal R TALLY, G TALLY
Select from MAKE/BREAK or POWER supply
Output Signals
HDTV signal Select from 3G-SDI/DUAL-LINK/HD-SDI (SMPTE424M, 292M standard)
4 channels 75Ω output
SD-SDI signal SD-SDI (SMPTE259M standard)
2 channels 75Ω output
Synchronization signal HDTV/SDTV selection : 1 channel 75Ω output
HDTV tri-sync signal : 0.6Vp-p
SDTV : 2Vp-p
Component signal Select a pair from HDTV GBR/YPbPr.
SDTV GBR/YCbCr 1 channel 75Ω output
Composite signal VBS
2 channels 1Vp-p 75Ω output
Picture monitor (PM) signal Select from 3G-SDI/DUAL-LINK/HD-SDI
2 channels 75Ω output
Select from SD-SDI/SDTV analog signal (R/G/B/Y/ENC)
2 channels 75Ω output

Waveform monitor (WFM) signal Select from 3G-SDI/DUAL-LINK-A/HD-SDI/SD-SDI
1 channel 75Ω output
Select from DUAL-LINK-B/HD-SDI/SD-SDI/SDTV analog signal (R/G/B/Y/ENC)
1 channel 75Ω output
Communication Select from 4-wire/Clearcom/RTS

4-wire : 2 channels 600Ω
Clearcom : 2 channels 200Ω
RTS : 2 channels 200Ω
MIC signal 0dBs standard 2 channels Low impedance
Tally signal R TALLY, G TALLY
General
Power voltage AC100/110/117/220/240V±10%
Power consumption Approx. 110VA (CCU-970 alone)
Ambient temperature Operating temperature : 0°C ~ +45°C
Storage temperature : -30°C ~ +60°C
Dimensions W483×H125×D457mm (not including projections)
Weight Approx. 28 kg
Support Products ・broadcast/HDK-970A/AP
・broadcast/HDK-97A
・broadcast/HDK-79GX
・broadcast/HDK-790GX
・broadcast/HDK-97ARRI