BS-97
3G Base Station
Discontinued Product
BS-97 is the half-rack size 3G ready Fiber transmission Base Station. 3G transmission systems can be configured in combination with 3G ready cameras.
- 3G Wideband transmission between camera head and BS as well as 1.5G output.
- Build-in SDTV Down Converter as standard for SDTV/SDTV simulcast output.
- 4 channels RET video input as standard. Input signal is either 3G-SDI or HD-SDI.
- QTV (VBS) x 1 as standard (2nd CH as option).
- HD-SDI TRUNK for the transmission of different video signal from camera between camera and CCU as option.*Note1
- Frame Synchronizer in RET video.*Note2
- SDI signal with embedded Audio
- Usable with existing HDK-79EX series / HDK-79GX cameras in 1.5G mode.Note3
*Note 1: Only in 1.5G mode.
*Note 2:The RET input signal is fixed to 2CH when the frame synchronizer is in use. Also VBS return signal can not be synchronized.)
*Note 3: New functions provided by 3G transmission of HDK-97A are not available.
This unit is mainly used with :
HDK-97A with FA-97
HDK-79GX (in 1.5G mode) with FA-97
| Input Signals | |
| GENLOCK signal (HDTV/SDTV supported) | HDTV: PS 1Vp-p 75Ω bridged connection or Tri-sync signal 0.6Vp-p ± 6dB 75Ω bridged connection SDTV: VBS 1Vp-p 75Ω bridged connection or BBS 75Ω bridged connection or BBS+10FIELD ID 75Ω bridged connection |
| Return signal | 3G-SDI/HD-SDI 4 channels* 75Ω single end input (* 2 channels when the frame synchronizer function is enabled.) SD-SDI/VBS (option) selection 4 channels (2 channels option) 75Ω single end input |
| Q-TV signal | VBS 2 channels 1Vp-p 75Ω single end input |
| Intercom signal (ENG/PROD) | Select from 4-wire/Clearcom/RTS 4-wire 2 channels 0dBm 600Ω Clearcom 2 channels -15dBs 200Ω RTS 2 channels 0dBm 200Ω PGM (Program sound) 0dBs standard 2 channels 600Ω/10kΩ AUDIO TRUNK 0dBs standard 1 channel 600Ω/10kΩ |
| Tally signal | R TALLY, G TALLY Select from MAKE/BREAK or POWER supply |
| OUTPUT Signals | |
| HDTV signal | Select from 3G-SDI/DUAL-LINK/HD-SDI (SMPTE424M, 292M standard) 4 channels 75Ω output SD-SDI signal SD-SDI (SMPTE259M standard) 2 channels 75Ω output |
| Synchronization signal | HDTV/SDTV selection 1 channel 75Ω output HDTV tri-sync signal 0.6Vp-p SDTV 2Vp-p |
| Composite signal | VBS 2 channels 1Vp-p 75Ω output |
| Picture monitor (PM) signal | Select from 3G-SDI/DUAL-LINK/HD-SDI 1 channel 75Ω output Select from SD-SDI/SDTV analog signal (R/G/B/Y/ENC) 1 channel 75Ω output |
| Waveform monitor (WFM) signal | Select from 3G-SDI/HD-SDI 1 channel 75Ω output Select from SD-SDI/SDTV analog signal (R/G/B/Y/ENC) 1 channel 75Ω output |
| Communication | |
| Intercom signal (ENG/PROD) | Select from 4-wire/Clearcom/RTS 4-wire 2 channels 600Ω Clearcom 2 channels 200Ω RTS 2 channels 200Ω MIC signal 0dBs standard 2 channels Low impedance |
| Tally signal | R TALLY, G TALLY |
| GENERAL | |
| Power voltage | AC100/110/117/220/240V±10% |
| Power consumption | Approx. 80VA (BS-97 alone) |
| Ambient temperature | Operating temperature : 0°C to +40°C Storage temperature : -30°C to +60°C |
| Ambient humidity | 30% to 90% without condensation |
| External dimensions | W219×H125×D457 (not including projections) |
| Weight | Approx. 9 kg (full-featured) |
| Support Products | ・broadcast/HDK-970A/AP ・broadcast/HDK-97A ・broadcast/HDK-79GX ・broadcast/HDK-790GX ・broadcast/HDK-97ARRI |
- Personal information is required
- Software
To download these information, personal information is required. Click the right blue button to download. ：Personal information is not required.