CCU-970
3G Camera Control Unit
Discontinued Product
CCU-970 is 3G ready Fiber transmission Camera Control Unit. 3G transmission systems can be configured in combination with 3G ready cameras.
- 3G Wideband transmission between camera head and CCU as well as 1.5G output.
- Build-in SDTV Down Converter as standard for SDTV/SDTV simulcast output.
- 4 channels RET video input as standard. Input signal is either 3G-SDI or HD-SDI.
- QTV (VBS) x1 as standard (2nd CH as option) and HD-SDI as option. *Note 1
- HD-SDI TRUNK for the transmission of different video signal from camera between camera and CCU as option.*Note 2
- Frame Synchronizer in RET video.*Note 3
- SDI signal with embedded Audio
- Also usable with existing HDK-79EX series / HDK-79GX cameras in 1.5G mode. *Note 4.
*Note 1: The return input signal can only be HDTV when this option is installed.
*Note 2: Only in 1.5G mode.
*Note 3:The RET input signal is fixed to 2CH when the frame synchronizer is in use. Also VBS return signal can not be synchronized.
*Note 4 : New functions provided by 3G transmission of HDK-97A are not available.
This unit is mainly used with : HDK-97A with FA-97, HDK-79GX (in 1.5G mode) with FA-97
| Input Signals | |
| GENLOCK signal (HDTV/SDTV supported) |
HDTV : PS 1Vp-p 75Ω bridged connection or Tri-sync signal 0.6Vp-p ± 6dB 75Ω bridged connection SDTV : VBS 1Vp-p 75Ω bridged connection or BBS 75Ω bridged connection or BBS+10FIELD ID 75Ω bridged connection |
| Return signal |
3G-SDI/HD-SDI : 4 channels* 75Ω single end input (* 2 channels when the frame synchronizer function is enabled.) 4 channels* 75Ω single end input |
| Q-TV signal | VBS : 2 channels 1Vp-p 75Ω single end input HD-SDI(option) : 1 channel 75Ω single end input |
| Intercom signal (ENG/PROD) | Select from 4-wire/Clearcom/RTS 4-wire : 2 channels 0dBm 600Ω Clearcom : 2 channels -15dBs 200Ω RTS : 2 channels 0dBm 200Ω |
| PGM (Program sound) | 0dBs standard 2 channels 600Ω/10kΩ |
| AUDIO TRUNK | 0dBs standard 1 channel 600Ω/10kΩ |
| Tally signal | R TALLY, G TALLY Select from MAKE/BREAK or POWER supply |
| Output Signals | |
| HDTV signal | Select from 3G-SDI/DUAL-LINK/HD-SDI (SMPTE424M, 292M standard) 4 channels 75Ω output |
| SD-SDI signal | SD-SDI (SMPTE259M standard) 2 channels 75Ω output |
| Synchronization signal | HDTV/SDTV selection : 1 channel 75Ω output HDTV tri-sync signal : 0.6Vp-p SDTV : 2Vp-p |
| Component signal | Select a pair from HDTV GBR/YPbPr. SDTV GBR/YCbCr 1 channel 75Ω output |
| Composite signal | VBS 2 channels 1Vp-p 75Ω output |
| Picture monitor (PM) signal | Select from 3G-SDI/DUAL-LINK/HD-SDI 2 channels 75Ω output Select from SD-SDI/SDTV analog signal (R/G/B/Y/ENC) 2 channels 75Ω output |
| Waveform monitor (WFM) signal | Select from 3G-SDI/DUAL-LINK-A/HD-SDI/SD-SDI 1 channel 75Ω output Select from DUAL-LINK-B/HD-SDI/SD-SDI/SDTV analog signal (R/G/B/Y/ENC) 1 channel 75Ω output |
| Communication | Select from 4-wire/Clearcom/RTS 4-wire : 2 channels 600Ω Clearcom : 2 channels 200Ω RTS : 2 channels 200Ω |
| MIC signal | 0dBs standard 2 channels Low impedance |
| Tally signal | R TALLY, G TALLY |
| General | |
| Power voltage | AC100/110/117/220/240V±10% |
| Power consumption | Approx. 110VA (CCU-970 alone) |
| Ambient temperature | Operating temperature : 0°C ~ +45°C Storage temperature : -30°C ~ +60°C |
| Dimensions | W483×H125×D457mm (not including projections) |
| Weight | Approx. 28 kg |
| Support Products | ・broadcast/HDK-970A/AP ・broadcast/HDK-97A ・broadcast/HDK-79GX ・broadcast/HDK-790GX ・broadcast/HDK-97ARRI |
- Personal information is required
- Software
To download these information, personal information is required. Click the right blue button to download. ：Personal information is not required.