BS-98
3G Base Station
Discontinued Product
BS-98 is a 3G ready fiber transmission Base Station for UnicamHD series cameras.
3G transmission systems can be configured in combination with 3G ready cameras.
- 3G Wideband transmission between camera head and CCU as well as 1.5G output.
- Selectable multi output port for 3G-SDI/HD-SDI/SD-SDI by the menu.
- 4 channels RET video input as standard. 3G-SDI, HD-SDI and SD-SDI signals are automatically identified.
- By menu selection, HD Q-TV and RET signals output through the MON SDI connecter on the rear of a camera.
Both HD Q-TV and Q-TV(VBS) can be used. Capable asynchronous image input and Embeded Audio x 4ch. - QTV (VBS) x2 as standard.(2nd channel is an option for FA-97A)
- HD-SDI TRUNK for the transmission of different video signal from camera between camera and CCU as option.
Multiplexed ANC（Embedded AUDIO etc.）is available in case the signal is synchronized with a camera.(Only in 1.5G mode) - Camera No. and ARC ID displayed on the front panel are convenient to use as well as capability of PGM3 and Y TALLY as standard.
| HDTV System (Input Signals) | |
| External Reference Input | GENLOCK : Tri-level sync ot BBS 75 ohm BNC x2 (Loop Through) (HDTV/SDTV automatic detection) SUB REF : 10 Field ID 75 ohm BNC x2 (Loop Through) |
| Return Video Input | 75 ohm 3G/HD/SD-SDI Single End 4ch or 2ch Active-Through (Menu Selection) |
| Q-TV (prompter) Input |
HD-QTV: HD-SDI 75 ohm single end 1ch SDTV: VBS 75 ohm single end 1ch(2ch:factory option) |
| Output Signals | |
| Line Video Output | 3G/HD-SDI : Serial Digital 75 ohm BNC 2ch 4 outputs (OUT1/OUT2) SMPTE 425M, SMPTE 372M, SMPTE292M standard * 3G-SDI format supports Dual-Link outputs (Menu Selection) |
| SDTV signals : Serial Digital 75 ohm BNC 1ch 2 outputs(OUT3)SMPTE292M | |
| VBS signal : 1.0Vp-p 75 ohm BNC 1ch 2 outputs | |
| Monitor Video Output | 3G/HD-SDI: Serial Digital 75 ohm BNC 1ch 1 output (HD PM) *SMPTE 425M, SMPTE292M standard |
| Trunk Video Output | HD-TRUNK : HD-SDI 75 ohm single end 1ch(factory option) |
| Intercom(ENG/PROD) | 4-wire or Clearcom or RTS 4-wire 0dBm 600 ohm 2ch Clearcom -15dBs 200 ohm 2ch RTS 0dBs 200 ohm 2ch MIC 0dBs 2ch 2 outputs Low impedance |
| Tally | R/G/Y 3ch OPEN (OFF) / GND (ON) 50mA (max.) |
| Control | Arcnet BNC x1ch Ethernet RJ-45 x1ch ICCP OCP/CCP x1, CCP/CSU x1 |
| Operating Voltage | AC100/110/117/220/240V±10% |
| Power Consumption | approx. 80VA (BS only) |
| Ambient Temperature | 0°C to +40°C (32°F to 104°F) |
| Relative Humidity | 30% to 90% (Non-condensing) |
| Dimensions | W218.6 x H125x D457mm< (W8.63 x H4.92 x D18.00 inches)(excluding protrusions) |
| Weight | approx. 9kg (20 lbs) |
| Support Products |
|
- Personal information is required
- Software
To download these information, personal information is required. Click the right blue button to download. ：Personal information is not required.