CCU-980
3G Camera Control Unit
Discontinued Product
CCU-980 is a 3G ready fiber transmission Camera Control Unit for UnicamHD series cameras. 3G transmission systems can be configured in combination with 3G ready cameras.
3G Wideband transmission between camera head and CCU as well as 1.5G output.
Selectable multi output port for 3G-SDI/HD-SDI/SD-SDI by the menu.
4 channels RET video input as standard. 3G-SDI, HD-SDI and SD-SDI signals are automatically identified.
By menu selection, HD Q-TV and RET signals output through the MON SDI connecter on the rear of a camera. Both HD Q-TV and Q-TV(VBS) can be used. Capable asynchronous image input and Embeded Audio x 4ch.
QTV (VBS) x2 as standard. (2nd channel is an option for FA-97A)
HD-SDI TRUNK for the transmission of different video signal from camera between camera and CCU as option. Multiplexed ANC（Embedded AUDIO etc.）is available in case the signal is synchronized with a camera.(Only in 1.5G mode)
Camera No. and ARC ID displayed on the front panel are convenient to use as well as capability of PGM3 and Y TALLY as standard.
| HDTV System (Input Signals) | |
| External Reference Input |
GENLOCK : Tri-level sync ot BBS 75 ohm BNC x2 (Loop Through) (HDTV/SDTV automatic detection) SUB REF : 10 Field ID 75 ohm BNC x2 (Loop Through) |
| Return Video Input | 75 ohm 3G/HD/SD-SDI Single End 4ch or 2ch Active-Through (Menu Selection) |
| Q-TV(prompter) Input |
HD-QTV: HD-SDI 75 ohm single end 1ch SDTV: VBS 75 ohm single end 1ch(2ch:factory option) |
| Output Signals | |
| Line Video Output |
3G/HD-SDI : Serial Digital 75 ohm BNC 2ch 4 outputs (OUT1/OUT2) SMPTE 425M, SMPTE 372M, SMPTE292M standard * 3G-SDI format supports Dual-Link outputs (Menu Selection) SDTV signals : Serial Digital 75 ohm BNC 1ch 2 outputs(OUT3)SMPTE292M VBS signal : 1.0Vp-p 75 ohm BNC 1ch 2 outputs |
| Monitor Video Output |
3G/HD-SDI : Serial Digital 75 ohm BNC 1ch 1 output (HD PM) *SMPTE 425M, SMPTE292M standard |
| Trunk Video Output | HD-TRUNK : HD-SDI 75 ohm single end 1ch(factory option) |
| Intercom(ENG/PROD) |
4-wire or Clearcom or RTS 4-wire: 0dBm 600 ohm 2ch Clearcom : -15dBs 200 ohm 2ch RTS: 0dBs 200 ohm 2ch MIC: 0dBs 2ch 2 outputs Low impedance |
| Tally | R/G/Y 3ch OPEN (OFF) / GND (ON) 50mA (max.) |
| Control |
Arcnet BNC x1ch Ethernet RJ-45 x1ch ICCP OCP/CCP x1, CCP/CSU x1 |
| Operating Voltage | AC100/110/117/220/240V±10% |
| Power Consumption | approx. 80VA (BS only) |
| Ambient Temperature | 0°C to +40°C (32°F to 104°F) |
| Relative Humidity | 30% to 90% (Non-condensing) |
| Dimensions |
W218.6 x H125x D457mm (W8.63 x H4.92 x D18.00 inches)(excluding protrusions) |
| Weight | approx. 28kg (62 lbs) |
| Support Products |
・broadcast/HDK-970A/AP ・broadcast/HDK-97A ・broadcast/HDK-55 ・broadcast/HDK-79GX ・broadcast/HDK-790GX ・broadcast/HDK-97ARRI |
- Personal information is required
- Software
To download these information, personal information is required. Click the right blue button to download. ：Personal information is not required.